PR-22-3-100-B-1/8-1200-M12熱電阻正
PR-22-3-100-B-1/8-1200-M12
PT100 RTD探頭，帶M12模塑連接器
PR-22 Series
PT100 RTD探頭，帶M12模塑連接器
PR-22 Series:PT100 RTD探頭，帶M12模塑連接器
PR-22-3-100-A-1/8-0600-M12
316 Stainless Steel Probe with Nylon Overmolded M12 A-Coded 4-Pin Connector (IP67). An M12 Extension Cable is Required for Installation.
Fractional and Metric Probe Diameters and Lengths
Great for Use As-Is or With Compression Fittings, Spring Loaded Fittings and Thermowells
In-Line, Remote and Wireless Transmitters Available
Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.
The PR-22 style M12 RTD sensor is similar to our PR-21A sensor except that it has an overmolded M12 connector (vs. a machined housing). This allows the PR-22 sensor to be a lower cost alternative to the PR-21 if an integral mounting thread is not required.
Product Specifications Include:
Nylon Overmolded 4-Pin M12 "A-Coded" Plug Style Connector.
316 Stainless Steel Probe.
1/4" and 1/8" Diameter Probes in 6", 9", 12" 18" and 24" Lengths.
6mm and 3mm Diameter Probes in 150, 250, 350, 500, 750 and 1000mm Lengths.
4-Wire Pt100 or Pt1000 (100 ohms at 0°C or 1000 ohms at 0°C, .00385 TCR (alpha)) Platinum RTD.
Accuracy: Class A or Class B per IEC 60751.
Temperature Ranges are: -30 to 350°C (-22 to 622°F) Class A Accuracy, -50 to 500°C (-58 to 932°F) Class B Accuracy and -50 to 90°C (-58 to 194°F) Connector End.
Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient Temperature.
The PR-22 Molded M12 RTD sensor can be used in a wide variety of applications as-is, or with one or more of Omega's In-Stock complimentary products such as:
Extension Cables with silicone, polyurethane or PVC cables and straight or right angled connectors.
In-line transmitters like the Omega SPRTX-SS and TX94A-SS series transmitters with integral M12 connectors.
Hand-held meters and instruments.
Contollers and panel meters.
Data loggers, data aquisition systems and recorders.
Stainless steel or brass compression fittings.
Or use them as replacement sensors in thermowells using Omega's spring loading kit.
The PR-22 RTD sensor contains an RTD element that meets the resistance vs. temperature requirements of IEC 60751, making it compatible with most of the proccess control and measurement equipment on the market today.
The integral M12 connector, wired in a 4-wire configuration, provides customers the flexability to use it in any 2-wire, 3-wire or 4-wire application depending on your equipment or measurement accuracy needs.
產(chǎn)品型號/產(chǎn)品描述
M12 Extension Cables
M12C-PVC-4-S-F-5 PVC Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
M12C-PUR-4-S-F-2 Polyurethane Extension Cable, 2 Meters Long with Straight Female M12 Connector One End
M12C-PUR-4-S-F-5 Polyurethane Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
M12C-SIL-4-S-F-1.5 Silicone Extension Cable, 1500 Millimeters Long with Straight Female M12 Connector One End
M12C-SIL-4-S-F-3 Silicone Extension Cable, 3 Meters Long with Straight Female M12 Connector One End
M12C-SIL-4-S-F-5 Silicone Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
PR-22-3-100-A-1/4-0600-M12 1/4" dia.x 6" long Pt100 CL-A
Metric Sized Sensor Assemblies
PR-22-3-100-A-M2-150-M12 2mm dia. x 150mm long Pt100 Class A
PR-22-3-100-A-M2-250-M12 2mm dia. x 250mm long Pt100 Class A
PR-22-3-100-A-M3-100-M12 3mm dia. x 100mm long Pt100 Class A
PR-22-3-100-A-M3-150-M12 3mm dia. x 150mm long Pt100 Class A
PR-22-3-100-A-M3-250-M12 3mm dia. x 250mm long Pt100 Class A
PR-22-3-100-A-M3-350-M12 3mm dia. x 350mm long Pt100 Class A
PR-22-3-100-A-M3-500-M12 3mm dia. x 500mm long Pt100 Class A
PR-22-3-100-A-M3-750-M12 3mm dia. x 750mm long Pt100 Class A
PR-22-3-100-A-M3-1000-M12 3mm dia. x 1000mm long Pt100 Class A
PR-22-3-100-A-M6-100-M12 6mm dia. x 100mm long Pt100 Class A
PR-22-3-100-A-M6-150-M12 6mm dia. x 150mm long Pt100 Class A
PR-22-3-100-A-M6-250-M12 6mm dia. x 250mm long Pt100 Class A
PR-22-3-100-A-M6-350-M12 6mm dia. x 350mm long Pt100 Class A
PR-22-3-100-A-M6-500-M12 6mm dia. x 500mm long Pt100 Class A
PR-22-3-100-A-M6-750-M12 6mm dia. x 750mm long Pt100 Class A
PR-22-3-100-A-M6-1000-M12 6mm dia. x 1000mm long Pt100 Class A
Fractionally Sized Sensor Assemblies
PR-22-3-100-A-1/8-0600-M12 1/8" dia.x 6" long Pt100 CL-A
PR-22-3-100-A-1/8-0900-M12 1/8" dia.x 9" long Pt100 CL- A
PR-22-3-100-A-1/8-1200-M12 1/8" dia.x 12" long Pt100 CL-A
PR-22-3-100-A-1/8-1800-M12 1/8" dia.x 18" long Pt100 CL-A
PR-22-3-100-A-1/8-2400-M12 1/8" dia x 24" long Pt100 CL-A
PR-22-3-100-A-1/4-0600-M12 1/4" dia.x 6" long Pt100 CL-A
PR-22-3-100-A-1/4-0900-M12 1/4" dia.x 9" long Pt100 CL-A
PR-22-3-100-A-1/4-1200-M12 1/4" dia.x 12" long Pt100 CL-A
PR-22-3-100-A-1/4-1800-M12 1/4" dia. x 18" long Pt100 CL-A
PR-22-3-100-A-1/4-2400-M12 1/4" dia. x 24" long Pt100 CL-A
注釋: For Class B element accuracy, change "-A" in model number to "-B" and subtract $4 from the price.
產(chǎn)品型號說明
(1) (2) (3)
PR-22-3-
選項描述
(1) Element Specification
選擇
100-A 代表 Pt100 Class A
1000-A 代表 Pt1000 Class A
100-B 代表 Pt100 Class B
(2) Probe diameter
選擇
-1/8 代表 1/8 inch diameter probe
-1/4 代表 1/4 inch diameter probe
-M2 代表 2 mm diameter probe
-M3 代表 3 mm diameter probe
-M6 代表 6 mm diameter probe
(3) Probe length
選擇
-0600-M12 代表 6 inch probe length (1/8" or 1/4" diameter)
-0900-M12 代表 9 inch probe length (1/8" or 1/4" diameter)
-1200-M12 代表 12 inch probe length (1/8" or 1/4" diameter)
-1800-M12 代表 18 inch probe length (1/8" or 1/4" diameter)
-2400-M12 代表 24 inch probe length (1/8" or 1/4" diameter)
-100-M12 代表 100 mm probe length (3mm or 6mm diameter)
-150-M12 代表 150 mm probe length (2mm 3mm or 6mm diameter)
-250-M12 代表 250 mm probe length (2mm 3mm or 6mm diameter)
-350-M12 代表 350 mm probe length (3mm or 6mm diameter)
-500-M12 代表 500 mm probe length (3mm or 6mm diameter)
-750-M12 代表 750 mm probe length (3mm or 6mm diameter)
-1000-M12 代表 1000 mm probe length (3mm or 6mm diameter)
PR-22-3-100-B-1/8-1200-M12
PR-22-3-100-B-1/8-1200-M12熱電阻正 相關產(chǎn)品
