美國omega FP8501A流速傳感器
低流速傳感器
FP-5600 and FP-8500
低流速傳感器
高分辨率
低功率
低流速為每秒0.3
集電極開路輸出
非常低的壓降
The FP-5600 and FP8500A series low flow sensors are high resolution, low power devices ideal for measuring flow in piping systems with extremely low velocities. Utilizing insertion paddlewheel technology, these sensors are easy to install and maintain. They incorporate state-of-the-art, advanced Hall-effect design, allowing them to operate with a wide range of voltages and current supplies. The sensors have a wide flow range and reverse polarity protection. The insertion design easily adapts to a wide range of applications.
Flow Range
| Pipe Size |
?" | ?" | 1" | 1?" | 1?" | 2" | 2?" | 3" | 4" | 5" | 6" | 8" | 10" | 12" |
| Range (gpm) |
0.3 to 19 |
0.5 to 34 |
0.8 to 54 |
1.4 to 94 |
1.9 to 127 |
3.2 to 210 |
4.5 to 300 |
7.0 to 461 |
12 to 794 |
19 to 1247 |
27 to 1801 |
47 to 3119 |
74 to 4915 |
105 to 6977 |
SPECIFICATIONS
Output Signal: Open collector, sinking
Output Frequency: 15 Hz per fps nominal
Operating Range: 0.3 to 20 fps
Pressure/Temperature:
PP sensor housing: 180 psi @ 20°C (68°F), 25 psi @ 85°C (185°F)
PVDF sensor housing: 200 psi @ 20°C (68°F), 25 psi @ 85°C (185°F)
Power Requirements: 3.3 to 24 Vdc <1.5 mA @ 3.3V to 6 Vdc, <20 mA @ 6V to 24 Vdc
Pipe Size Range: 0.5 to 24"
Repeatability: ±0.5% of full range
Linearity: ±1% of full range
Materials: Refer to ordering information for material options available
O-rings: FKM
Cable Type: Twisted pair, foil shield with drain wire
Cable Length: 7.6 m (25'); 300 m (1000') max
產(chǎn)品型號/產(chǎn)品描述
Standard Mount Low Flow Paddlewheel Sensors with Threaded Cap
FP-5600 Polypropylene housing/Titanium shaft/Black PVDF rotor, 0.5 to 4" pipe size
FP-5601 Polypropylene housing/ Titanium shaft/Black PVDF/5 to 8" pipe size
FP-5602 Polypropylene housing/Titanium shaft/Black PVDF rotor,10" or larger pipe size
FP-5603 Natural PVDF housing/Hastelloy C shaft/Natural PVDF rotor, 0.5 to 4" pipe size
Integral Mount, Low Flow Paddlewheel Sensor
(For use with FP90 Transmitter and FP90IM Integral Mounting Kit)
FP8501A Integral mount sensor for FP85A Polypropylene housing/Titanium shaft/Black PVDF rotor, 0.5 to 4" pipe size
FP8502A Integral mount sensor for FP85A Polypropylene housing/Titanium shaft/Black PVDF rotor,10" or larger pipe size
FP8503A Integral mount sensor for FP85A , Natural PVDF housing/Hastelloy C shaft/Natural PVDF rotor, 0.5 to 4" pipe size
FP90IM Integral Mounting Kit for FP90 transmitter Series
FP90-1 Transmitter
注釋: Comes complete with operator’s manual.
美國omega FP8501A流速傳感器
