D5141接口模塊 美國omega
OMEGABUS系列四通道傳感器連接計算機接口模塊
D5000 Series
1年保修 CE OmegaCare
OMEGABUS系列四通道傳感器連接計算機接口模塊
D5000 Series:OMEGABUS系列四通道傳感器連接計算機接口模塊
d5111
四通道的模擬輸入
完整的傳感器，RS-485或RS-232C接口
ASCII格式的命令/響應協議
500 V RMS的模擬輸入隔離
15位的測量分辨率
連續自標定；沒有任何的調整
可編程的數字濾波器
10伏至30伏直流電需要非穩壓電源
RS-485通信線的瞬態抑制
螺絲端子插頭連接器提供
四通道的傳感器到計算機模塊D5000）解決方案是完整的家庭設計的數據采集系統基于個人計算機和其他設備的處理器為基礎的具有標準串行I／O端口。該模塊的模擬輸入信號轉換為工程單位4和發送ASCII碼格式的主機中的任何與標準的RS - 485或RS - 232C端口。這些模塊可以測量溫度，電壓和電流。該模塊可直接連接到傳感器和執行的全寬的品種；信號調理、轉換、線性化和工程單位。
該交換機模塊是包含在罐或盤。的功能，如地址、波特率、奇偶校驗、回聲等。可選擇的命令是使用簡單的通信port–without要求訪問的模塊。在非易失性存儲在EEPROM的選擇，即使在電源的維護數據的情況。
*關鍵的是，模塊系列D5000是容易使用的。你不需要經歷復雜的工程中數據采集硬件。D5000系列模塊與個人電腦，家庭人與CAN總線的數據采集系統的構建。這種模塊化的方法，數據采集是非常靈活的，易于使用的和成本有效的。該模塊可以混合和匹配到你的應用程序安裝。他們可以被放置在從遠程主機和從對方。你可以到一個字符串線30集在線模塊通過RS-485與repeaters。
所有的組件是提供與終端連接器和插頭的螺釘被安裝硬件。該連接器允許系統擴展，或沒有disturbing場reconfiguration修復線路。
操作原理：
D5000 modules are complete four-channel data acquisition systems. Each unit contains analog signal conditioning circuits optimized for a specific input type. The amplified sensor signals are converted to digital data with a microprocessor-controlled integrating A/D converter. Offset and gain errors in the analog circuitry are continuously monitored and corrected using microprocessor techniques. The D5000 converts the digital signal data into engineering units using look-up tables. The resultant data is stored in ASCII format in a memory buffer. The modules continuously convert data at the rate of 8 conversions per second and store the latest result in the buffer.
The host computer may request data by sending simple ASCII commands to the module.
DIGITAL FILTER
The D5000 options include a unique programmable single pole digital filter. The filter is used to smooth analog data in noisy environments. Separate time constants may be specified for small and large signal changes. Typically, a large time constant is specified for small signal changes to filter out noise and provide stable output readings. A smaller time constant may be chosen for large signal changes to provide fast response to such changes.
COMMUNICATIONS
The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII The D5000 will instantly respond by communicating the ASCII buffer data back to the host.
USER OPTIONS
The D5000 offers a variety of userselectable options including choice of address, baud rate, parity, echo, etc. All options are selectable using simple commands over the communications port. All options are stored in a nonvolatile EEPROM which maintains data even after power is removed.
COMMUNICATIONS The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII characters. This allows the information to be processed with string functions common to most high-level languages such as BASIC. For computers that support standard ports such as RS-232C, no special machine language software drivers are necessary for operation.
RS-232C is not designed to be used as a multiparty system; however, the module can be daisychained to allow many modules to be connected to a single communications port. In this network, any characters transmitted by the host are received by each module in the chain and passed on to the next module until the information is echoed back to the host. If a module is correctly addressed and receives a valid command, it transmits a response on the daisy chain network. The response will be rippled through any other modules in the chain until it reaches the host. RS-485 was developed for multidropped systems that can communicate at high data rates over long distances. For systems requiring many modules, high speed or long distances, RS-485 is recommended.
| To Order (Specify Model Number) | ||
| RS-232C Output Model Number |
RS-485 Output Model Number |
Input |
| D5111 | D5112 | 100 mV |
| D5121 | D5122 | 1 V |
| D5131 | D5132 | 5 V |
| D5141 | D5142 | 10 V |
| D5151 | D5152 | 100 V |
| D5251 | D5252 | 4-20 mA |
| D5311 | D5312 | J (Iron-Constantan) |
| D5321 | D5322 | K (Chromel-Alumel) |
| D5331 | D5332 | T (Copper-Constantan) |
| D5341 | D5342 | E (Chromel-Constantan) |
| D5451 | D5452 | 2252 Ohm Thermistor |
產品型號 產品描述
Voltage Input Modules
D5111 100 mV input, RS-232C output
D5112 100 mV input, RS-485 output
D5121 1 V input, RS-232C output
D5122 1 V input, RS-485 output
D5131 5 V input, RS-232C output
D5132 5 V input, RS-485 output
D5141 10 V input, RS-232C output
D5142 10 V input, RS-485 output
D5151 100 V input, RS-232C output
D5152 100 V input, RS-485 output
Current Input Modules
D5251 4 to 20 mA input, RS-232C output
D5252 4 to 20 mA input, RS-485 output
Thermocouple Input Modules
D5311 Type J thermocouple input, RS-232C output
D5312 Type J thermocouple input, RS-485 output
D5321 Type K thermocouple input, RS-232C output
D5322 Type K thermocouple input, RS-485 output
D5331 TypeT thermocouple input, RS-232C output
D5332 TypeT thermocouple input, RS-485 output
D5341 Type E thermocouple input, RS-232C output
D5342 Type E thermocouple input, RS-485 output
Thermistor Input Modules
D5451 2252 ohm thermistor input, RS-232C output
D5452 2252 ohm thermistor input, RS-485 output
Accessories
A1000 RS-232 to RS-485 Converter, 115 Vac power
A1000-230 RS-232 to RS-485 Converter, 230 Vac power
A2000 RS-232 to RS-485 Converter, 10-30 Vdc power
A1000-CABLE 5 ft. cable, male to female
D5141接口模塊 美國omega
