CN352-JC2美國OMEGA CN352-JC2貨源穩定
CN352-JC2
溫控器
CN350, CN360, & CN370 Series
1年保修
溫控器
CN350, CN360, & CN370 Series:溫控器
Economical, Easy to Use
1 /16 DIN Panel Cutout
Input Types; J, K, R, S Thermocouples and 100 .Platinum RTD
Fixed Proportional Band (4%) with Manual Reset
Fixed Cycle Time: 30 s for Mechanical Relay and 3 s for dc Solid State Output
User Convertible for Proportional or On-Off Control
The CN350, CN360 and CN370 Series controllers are designed for economical and easy use. Models are available with digital, deviation, or non-indicating display, for J, K, R, and S thermocouples or 100 . platinum RTD input. The small 1.88" (48 mm) square face, 1.77" square cutout ( 1 /16 DIN) and short depth behind panel (3.54", 90 mm) help save panel space and installation costs. All models have a digital thumbwheel for adjusting the setpoint. The CN370 Series models provide continuous digital display of the process temperature. The CN360 Series indicate whether the process temperature is within ±1.5% full scale of the setpoint or above or below setpoint. The CN350 Series are non-indicating. These controllers are time proportional with manual reset, and can be converted to ON-OFF control by changing internal jumpers. The proportional band is fixed at 4%.
Two types of output are available. A 2.5 Amp (SPDT) mechanical relay is for use with systems which can use a 30-second cycle time. With an external solid state relay, loads to 5 Amps can be accommodated. For systems which require a faster cycle time, the dc solid state driver output should be used. This has a cycle time of approximately 3 seconds and can control high ac loads using a dc controlled solid state relay.
產品型號 產品描述
Relay Output Model Controllers
Indicating Controllers
CN371-JF3-24VDC Time Proportional Controller, J Input, 0-499 Degree Fahrenheit Range, DC Pulse Output with an Indicating Display. 24 Vdc Power.
CN371-JC2 Time Proportional Controller, J Input, 0-399 Degree Celcius Range, Mechanical Relay Output with an Indicating Display.
Deviation Controllers
CN361-P1F4 Time Proportional Controller, RTD Input, 0-799 Degree Fahrenheit Range, Mechanical Relay Output with an Deviation Display.
DC PULSE OUTPUT UNITS
Non-Indicating Controllers
CN352-P2CX Time Proportional Controller, RTD Input, 0-99.9 Degree Celcius Range, DC Pulse Output, Non-Indicating.
CN352-P1F2 Time Proportional Controller, RTD Input, 0-399 Degree Farenheit Range, DC Pulse Output, Non-Indicating.
CN352-P1C2 Time Proportional Controller, RTD Input, 0-399 Degree Celcius Range, DC Pulse Output, Non-Indicating.
CN352-JC2 Time Proportional Controller, J Input, 0-399 Degree Celcius Range, Mechanical Relay Output with an Non-Indicating Display.
CN352-KC2 Time Proportional Controller, K Input, 0-399 Degree Celcius Range, Mechanical Relay Output with an Non-Indicating
產品型號說明
(1) (2) (3) (4)
CN3
-
Qty: Add To Shopping Cart
選項描述
(1) Display Option
選擇
5 代表 Non-Indicating
6 代表 Deviation Display
7 代表 Digital Readout Indication
(2) Output Option
選擇
1 代表 Mechanical Relay
2 代表 DC Pulse Driver
(3) Sensor Type and Temperature Range
選擇
JC2 代表 J Thermocouple 0 to 399 Degrees C
JF3 代表 J Thermocouple 0 to 499 Degrees F
JF4 代表 J Thermocouple 0 to 799 Degrees F
KC2 代表 K Thermocouple 0 to 399 Degrees C
KC5 代表 K Thermocouple 0 to 999 Degrees C
KC6 代表 K Thermocouple 0 to 1199 Degree C
KF5 代表 K Thermocouple 0 to 999 Degrees F
KF8 代表 K Thermocouple 0 to 1999 Degree F
RC7 代表 R Thermocouple 0 to 1699 Degrees C
RF9 代表 R Thermocouple 0 to 2999 Degrees F
SC7 代表 S Thermocouple 9 to 1699 Degrees C
P1C1 代表 100 Ohm Platinum RTD -99 to 99 Degrees C
P2CX 代表 100 Ohm Platinum RTD 0 to 99.9 Degrees C
P1C2 代表 100 Ohm Platinum RTD 0 to 399 Degrees C
P1F2 代表 100 Ohm Platinum RTD 0 to 399 Degrees F
P1F4 代表 100 Ohm Platinum RTD 0 to 799 Degrees F
(4) Low Voltage 24 Vdc Power
選擇
Nothing(leave field blank) 代表 No Option
-24VDC 代表 24 Volt dc Power Option
CN352-JC2
CN352-JC2美國OMEGA CN352-JC2貨源穩定 相關產品
