CL900-110校驗儀美國OMEGA

CL900-110校驗儀

hot point?干體式探頭校準器
CL900 and CL950 Series
hot point?干體式探頭校準器
CL900 and CL950 Series:hot point?干體式探頭校準器

校準的熱電偶和RTD的秒 

高精度的0.9°C（1.5°F）和優異的穩定性（0.3°F）的精密校準 

便攜式的工廠，實驗室和儀器的商店 

可互換的測試威爾斯和cl950建于5口井的設計提供了靈活性 客戶

寬的溫度范圍內40以上的環境°F 900°F（482°C）覆蓋了大部分的工業應用 

可用的NIST校準

歐米茄的新熱點?校準的熱電偶和RTD探針允許快速和方便的0.9°C校正（1.5°F）。一個完整的RTD傳感器，保證了測量精度高和重復性。一個內置的微處理器為基礎的數字PID控制器保證了優異的穩定性。設定值與實際溫度同時顯示。溫度可以設定在一個度的增量從22°C（40°F）高于環境溫度482 C（900 F°°）。

該cl900校準器接受各種標準和度量可選插件，可在4“和6”的深度和探針直徑從1 / 8“3 / 8”。未鉆孔插入也可用。該cl900來完成一個1 / 4“直徑，6“深深的插入，插入塊鉗。額外的插入可以訂購其他直徑的探頭分別所需。6“深度插入用于探針7”和4“長；深度插入用于探針5”長。

該cl950校準器具有內置的好5端口大小以容納一個1 / 16“，1 / 8“，3 / 16“，和兩個1 / 4“直徑的探頭。多端口的設計允許的校準或NIST探針和表可以作為一個標準而使用其他探針校準。5端口的設計還允許在一個時間的一個以上的探頭校準，并消除了需要單獨插入威爾斯。

Inserts for CL900 Series
Model No. Description
CL901 Insert, 1/8 dia. x 4" deep test well
CL901-M Metric insert, 2 dia. x 101.6 mm deep test well
CL902 Insert, 1/8 dia. x 6" deep test well
CL902-M Metric insert, 2 dia. x 152.4 mm deep test well
CL903 Insert, 3/16 dia. x 4" deep test well
CL903-M Metric insert, 3 dia. x 101.6 mm deep test well
CL904 Insert, 3/16 dia. x 6" deep test well
CL904-M Metric insert, 3 dia. x 152.4 mm deep test well
CL905 Insert, 1/4 dia. x 4" deep test well
CL905-M Metric insert, 4.5 dia. x 101.6 mm deep test well
CL906 Insert, 1/4 dia. x 6" deep test well
CL906-M Metric insert, 4.5 dia. x 152.4 mm deep test well
CL907 Insert, 5/16 dia. x 4" deep test well
CL907-M Metric insert, 6 dia. x 101.6 mm deep test well
CL908 Insert, 5/16 dia. x 6" deep test well
CL908-M Metric insert, 6 dia. x 152.4 mm deep test well
CL909 Insert, 3/8 dia. x 4" deep test well
CL910 Insert, 3/8 dia. x 6" deep test well
CL911 Insert, undrilled
Specifications
(All specifications are based on the test probes being in contact with the bottom of the test well)
Temperature Range: Ambient +22 to 482°C (+40 to 900°F)
Operating Ambient Temperature Range: 5°C to 38°C (40°F to 100°F)
Accuracy: (1°F resolution)
CL900 with 6" test well inserts: ±1.5°F ±1 LSD.
CL900 with 4" test well inserts: ±3°F ±1 LSD.
CL950: ±1.5°F, ±1 LSD.
Control Stability: ±0.3°F or better
Temperature Uniformity (within the bottom 1" of the test well):
CL900:
with 6" test well inserts: 0.3%
with 4" test well inserts: ±0.4%.
CL950: ±0.3%
Max. Probe Immersion:
CL900:
with 6" test well inserts: 150 mm (6")
with 4" test well inserts: 100 mm (4").
CL950: 150 mm (6")
Control: Microprocessor-based PID digital controller with data retention
Power: 110-125 Vac, 50/60 Hz, 1050 watts; 220 Vac, 50/60 Hz, 1050 watts
Dimensions: 300 H x 216 W x 311 mm D (11.75 x 8.5 x 12.25")
Weight: 10.1 kg (22.3 lb)
CL900-110 hot point? dry block calibrator
CL900-110 hot point? dry block calibrator, with DSS-460-K benchtop thermometer, calibrating a single thermocouple probe, shown smaller than actual size. multi-well accepts up to 5 probes at one time
CL950 multi-well accepts up to 5 probes at one time and comes standard with 1/16, 1/8, 3/16 and two 1/4" diameter holes.
multi-well accepts up to 5 probes at one time
CL900 accepts any insert listed in the table above.
See related books on Controller Theory and Applications.

注釋: Comes with complete operator's manual. Inserts are for CL900 and CL900A hot point? calibrators only. To order NIST Calibration points add suffix “-NIST” to model number and $175 to price.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

產品型號/產品描述
Hot Point?Calibrators
CL900-110 hot point?calibrator, 110 Vac
CL900-220 hot point?calibrator, 220 Vac
CL950-110 Multi-well hot point?110 V
CL950-220 Multi-well hot point?220 V
Inserts for CL900 Series
CL901 Insert, 1/8" dia. x 4" deep test well
CL901-M Metric insert, 2 mm dia. x 106.6 mm deep test well
CL902 Insert, 1/8" dia. x 6" deep test well
CL902-M Metric insert, 2 mm dia. x 152.4 mm deep test well
CL903 Insert, 3/16" dia. x 4" deep test well
CL903-M Metric insert, 3 mm dia. x 106.6 mm deep test well
CL904 Insert, 3/16" dia. x 6" deep test well
CL904-M Metric insert, 3 mm dia. x 152.4 mm deep test well
CL905 Insert, 1/4" dia. x 4" deep test well
CL905-M Metric insert, 4.5 mm dia. x 106.6 mm deep test well
CL906 Insert, 1/4" dia. x 6" deep test well
CL906-M Metric insert, 4.5 mm dia. x 152.4 mm deep test well
CL907 Insert, 5/16" dia. x 4" deep test well
CL907-M Metric insert, 6 mm dia. x 106.6 mm deep test well
CL908 Insert, 5/16" dia. x 6" deep test well
CL908-M Metric insert, 6 mm dia. x 106.6 mm deep test well
CL909 Insert, 3/8" dia. x 4" deep test well
CL910 Insert, 3/8" dia. x 6" deep test well
CL911 Insert, undrilled

CL900-110校驗儀

CL900-110校驗儀美國OMEGA 相關產品